Proulx Cutting Heads

UN69R 2 line Bump and Cut Head for RIGHT HAND rotating brush cutters/trimmers only

The UN69R is based on the very successful UN39 2 line bump and cut Head which was developed in the 1980’s.

The ‘SWIFT LOAD’ concept allows the operator to replace the nylon monofilament line without having to dismantle the head.

Each end of the monofilament line is pushed through each the eyelet and secured to the spool.

The Monofilament line is then wound onto the spool by rotating the head cover using a simple ratchet principle; this winds the line onto the spool without any ‘cross over’, and prevents ‘line weld’.

This simple method makes line indexing more efficient.

The UN69R is designed for the small to medium powered brush cutter and offering all the advantages of the proven bump feed mechanism from Proulx Mfg.

The Swift Load system allows for easy indexing of the monofilament during use.

Overhang on sides of head protects eyelet area, and gives the monofilament a sheltering area if user cuts too close to solid object.

Moulded struts on top of the head re-enforces the housing and also helps to inhibit weed wrap.

Easily replaceable eyelets.

Specifications:

- Head type Semi-automatic simple bump feed
- Cutting line Supplied with 5.7 metres of 2.0mm professional quality round line
- Head diameter 90 mm
- Head weight 182gms including UA bolt
- Bolt type UA (Aluminium)
- Eyelets Aluminium

Packaging: Bulk delivery, clamshell with branded header cards, polythene bag with branded header card. Head is available with or without adapter bolt.

>> BACK to CUTTING HEADS